Mobile X-Ray Shield with Side Wings | A/B/C Radiation Screens

Mobile X-Ray Protective Screen Available in Models A, B & C

Our Translucent Lead Radiation Screen is designed to provide flexible radiation shielding for healthcare professionals working in X-ray, fluoroscopy, C-arm, and interventional environments. Combining a lead glass viewing window with a lead-lined lower panel, the screen offers effective protection against scattered radiation while maintaining a clear view of patients and medical equipment.

To accommodate different clinical layouts and shielding requirements, the screen is available in three configurations-Model A, Model B, and Model C. Each model is engineered to deliver the appropriate level of protection based on the direction of radiation exposure and the operator's working position.

Mobile X-ray environments often require radiation protection that can move with the workflow rather than remain fixed in one position. This mobile X-ray protective shield is designed to help create a practical barrier between medical staff and scattered radiation while maintaining clear visual contact with the working area.

The transparent upper section allows clinicians to observe patients, equipment and procedural activity from behind the shield. At the same time, the lead-lined protective structure provides a physical barrier for use in X-ray, fluoroscopy and other imaging environments where staff may remain inside the room during operation.

Protection Where Staff Need It

The screen is designed to provide shielding against scattered X-ray radiation in the operator working area. Its combination of a transparent protective panel and lead-lined lower section creates a barrier that supports both upper-body visibility and broader physical coverage.

Depending on room layout and operator position, Model A, B or C can be selected to provide straight, single-side or dual-side shielding geometry.

Clear Visibility During Procedures

Radiation protection should not unnecessarily separate clinical staff from the procedure.

The transparent viewing section helps users maintain a clear line of sight to the patient, imaging equipment and surrounding work area while standing behind the radiation protection screen. This can be particularly useful during fluoroscopy, C-arm imaging and interventional procedures where continuous visual awareness is important.

Flexible for Changing Clinical Workflows

Unlike fixed radiation barriers, the mobile structure can be repositioned as equipment, staff and procedural layouts change.

Lockable casters allow the mobile radiation shield to be moved between working positions and secured when in use. The A/B/C configurations also provide different shielding geometries, giving hospitals and imaging facilities more flexibility when selecting a screen for different room layouts and scatter directions.

By combining radiation protection, clear visibility and mobile positioning, the screen is designed as a practical shielding solution for clinical environments where workflow and equipment placement can change from one procedure to another.

The three configurations are designed for different room layouts, operator positions and scatter-radiation directions. The main difference is not the basic shielding function, but the geometry of the protective barrier around the working position.

Model A - Straight Protective Screen

Model A uses a straight-panel design and is the most compact configuration of the three.

It is suitable where the operator mainly needs a barrier between themselves and the X-ray source or patient, and where lateral shielding is less important.

Typical use cases include:

• general X-ray rooms;
• mobile radiography;
• temporary shielding positions;
• clinical areas with limited floor space.

Because there are no side wings, Model A is easier to position in narrow spaces and can be moved quickly between different working areas.

Model B - Single-Wing Radiation Shield

Model B adds one side wing to the main protective panel.

This configuration is useful when scattered radiation may reach the operator from the front and predominantly from one lateral direction. The side wing extends the shielding area around one side of the working position without requiring the larger footprint of a double-wing screen.

Model B can be a practical choice for:

• C-arm imaging;
• fluoroscopy procedures;
• operator positions located to one side of the imaging system;
• rooms where equipment layout creates a predictable lateral scatter path.

The single-wing structure provides more geometric coverage than a straight screen while still keeping the shield relatively easy to position.

Model C - Double-Wing Radiation Shield

Model C uses two side wings in addition to the main panel, creating the widest shielding geometry among the three configurations.

It is designed for situations where the operator may be exposed to scattered radiation from more than one direction or where equipment and staff positions change during the procedure.

Typical applications include:

• interventional radiology;
• multi-angle fluoroscopy;
• hybrid operating rooms;
• procedures involving frequent C-arm repositioning;
• workstations requiring broader side coverage.

The two wings help extend the protective area around both sides of the operator position, making Model C more suitable for complex layouts where a straight barrier may leave larger lateral gaps.

Which Model Should You Choose?

Choose Model A when frontal shielding and a compact footprint are the main priorities.

Choose Model B when the working position requires frontal protection plus additional coverage on one side.

Choose Model C when the workflow involves changing imaging angles or scatter may reach the operator from both sides.

The final configuration should be selected according to room layout, equipment position, operator location and the facility's radiation protection requirements.

This mobile X-ray protective shield is designed with a 2.0mmPb lead equivalence, providing a substantial physical barrier for clinical environments where staff may be exposed to scattered X-ray radiation.

For the A/B/C configurations, the 2.0mmPb shielding level is combined with different barrier geometries, allowing users to choose straight, single-wing or double-wing coverage according to room layout and operator position.

The Pb value should be evaluated together with X-ray energy, equipment type, working distance and facility radiation-safety requirements. Technical documentation can be provided for project evaluation where available.

Medical Imaging & Clinical X‑Ray Protection

Within hospital imaging suites and clinical treatment zones, personnel frequently stay inside the room during active X‑ray and fluoroscopy procedures. Scattered radiation poses a persistent occupational hazard for techs and clinicians in these spaces, and a mobile X‑ray protective shield delivers a highly adaptable barrier you can reposition to match staff workstations and scatter‑radiation directions.

Its built‑in transparent viewing window keeps practitioners visually connected to patients, operating devices and the whole procedural zone. Available A/B/C structural variants offer different shielding geometries, so you can adjust coverage to fit shifting clinical room configurations.

Radiology Room Radiation Protection

Most radiology departments run multiple diagnostic imaging units, requiring protective barriers that can shift from one exam station to another.

The 2.0mmPb mobile radiation screen fits general radiography rooms, fluoroscopy bays and other diagnostic imaging sites where extra operator shielding is necessary. Model A delivers basic front‑face radiation coverage. Models B and C add single‑side or dual‑side extended shielding, ideal when equipment layout creates broad scattered‑radiation pathways.

For medical facilities seeking flexible radiology room radiation protection, this mobile screen works as a great supplement instead of depending entirely on static fixed barriers.

Dental X‑Ray Shielding

Dental X‑ray rooms commonly suffer from limited floor space, with varied layouts for panoramic, cephalometric and other dental imaging hardware.

Placed between practitioners and the imaging zone, a mobile dental X‑ray shield features a clear transparent upper panel, so staff keep full sight of the patient throughout exposures. Thanks to its wheeled movable design, it adapts well for dental clinics that rearrange equipment or work areas on an ongoing basis.

When dental practices are sourcing practical X‑ray shielding for operators, this mobile screen serves as a solid alternative to permanent wall‑mounted partitions.

Veterinary X‑Ray Protection

Compared with human radiology work, veterinary X‑ray imaging comes with far less predictable positioning. Animals, exam tables and team members keep shifting mid‑procedure, which also alters the optimal placement for radiation barriers.

Available in A/B/C configurations, these mobile radiation protection screens can be relocated freely to suit operator positions and each unique imaging setup. The transparent viewing panel lets veterinary teams monitor animals and running equipment safely behind lead shielding.

Such outstanding flexibility makes this product well‑suited for veterinary X‑ray protection inside animal clinics and pet hospitals, where room layouts and exam workflows rarely stay unchanged.

No two radiation‑protection projects are exactly alike. Demands shift based on working surroundings, available floor space, actual radiation exposure levels and day‑to‑site workflow. That is why Loshield delivers tailor‑made translucent lead radiation screens and mobile X‑ray shielding solutions, built to fit unique demands from hospitals, research labs, medical equipment vendors and industrial inspection enterprises.

Size Customization

Shielding dimension needs change widely from one job site to another. Loshield adjusts overall screen measurements, protected coverage zones and mechanical frame structures following your real‑world application conditions.

Whether you are shopping for a space‑saving mobile radiation shield for tight clinical rooms or a large‑format protective barrier for broader‑range coverage, our engineering team puts together a workable setup matched to your workspace layout and on‑site operating routines.

Customizable parameters cover:

• Overall screen height & width
• Physical dimensions of the radiation‑protected area
• Custom frame structural design
• Wheel and base assemblies for smooth mobility
• Non‑standard special sizes for specialized X‑ray working environments

Lead Equivalent Customization

Required radiation attenuation levels differ greatly, driven by your X‑ray source type, operational parameters and local safety compliance standards. Loshield supplies multiple lead‑equivalent thickness grades so customers hit exact target radiation‑blocking performance.

Available custom‑tuned options include:

Multiple lead equivalent thickness selections ‑ Application‑oriented shielding‑performance tuning ‑ Targeted solutions for diagnostic X‑ray, dental X‑ray, veterinary radiography and industrial X‑ray inspection scenarios

Logo & Branding Customization

Distributors, medical‑equipment suppliers and OEM cooperation partners can take advantage of Loshield's private‑label and branding services to solidify your local market competitiveness.

Custom branding services contain: ‑ Custom‑printed product logos ‑ Bespoke product identification labels ‑ Brand‑aligned packaging designs ‑ Business‑oriented customized technical & sales documentation

Packaging Customization

Built for cross‑border shipment and long‑term partnership development, Loshield provides application‑specific packaging solutions balancing safe transit and professional outward presentation.

Flexible packaging selections: ‑ Custom‑printed cartons and adhesive labels ‑ Export‑grade heavy‑duty protective packaging ‑ Custom product marking & identification materials ‑ Bulk‑order oriented packaging schemes

Partner with JTBYShield for Professional Radiation Protection Solutions

Backed by solid hands‑on experience manufacturing radiation‑protection hardware, JTBYShield cooperates with worldwide distributors, medical‑care institutions and industrial‑sector buyers to supply robust shielding systems built around individual‑project specifications.

We handle everything: physical sizing, radiation‑shielding capability, brand marking all the way to export‑ready packaging. Our goal is to develop radiation‑protection products perfectly aligned with your practical‑site requirements.

Hot Tags: Mobile X-Ray Shield with Side Wings | A/B/C Radiation Screens, China, manufacturers, suppliers, factory, customized, wholesale, best, cheap, professional, for sale, near me