In the label indicating the pigtail connector, we often see "FC/PC", "SC/PC" and so on.
Its meaning is as follows
The part before/indicates the connector model of the pigtail
The "SC" joint is a standard square joint, made of engineering plastic, which has the advantages of high-temperature resistance and not easy oxidation. The optical port on the side of the transmission device usually uses an SC connector
The "LC" connector is similar in shape to the SC connector and smaller than the SC connector.
The "FC" joint is a metal joint, generally used on the ODF side, and the pluggable number of metal joints is more than the varieties of plastic connectors, in addition to the three introduced above, there are MTRJ, ST, MU, and so on.
After the "/" indicates the fiber section process, that is, the grinding method.
"PC" is the most widely used equipment of telecom operators, and its joint section is flat.
SC indicates that the pigtail connector is an SC connector. The side optical interface of transmission devices in the industry generally uses an SC connector. The SC connector is made of engineering plastic and is resistant to high temperatures and oxidation. The optical interface on the ODF side generally uses an FC connector, which is a metal connector, but the ODF does not have high-temperature problems. The metal connector can be inserted and removed more times than the plastic connector, and the ODF pigtail is maintained more than the optical pigtail. Other common connector models are ST, DIN, and FDDI.
"PC" indicates the fiber optic joint cross-section process, PC is the most common. The APC model is the most used in broadcasting and early CATV. The pigtail head uses an inclined end face, and the slope is generally not visible, which can improve the quality of the TV signal, mainly because the TV signal is analog light modulation, when the coupling surface of the joint is vertical, the reflected light returns along the original path. Since the uneven refractive index distribution of the fiber will return to the coupling surface again, although the energy is very small, because the analog signal can not completely eliminate the noise, it is equivalent to superimposing a weak signal with a delay on the original clear signal. In the picture is a double shadow. The Angle of the pigtail headband prevents the reflected light from returning along the original path. General digital signals generally do not have this problem.
There is also a "UPC" process, its decay is smaller than PC, and the enamel plate of the equipment with special needs is generally FC/UPC. The internal jumper of the ODF frame of foreign manufacturers is FC/UPC, which improves the index of the ODF device itself.
"PC" indicates the fiber optic joint cross-section process, PC is the most common. The APC model is the most used in broadcasting and early CATV. The pigtail head uses an inclined end face, and the slope is generally not visible, which can improve the quality of the TV signal, mainly because the TV signal is analog light modulation, when the coupling surface of the joint is vertical, the reflected light returns along the original path. Since the uneven refractive index distribution of the fiber will return to the coupling surface again, although the energy is very small, because the analog signal can not completely eliminate the noise, it is equivalent to superimposing a weak signal with a delay on the original clear signal. In the picture is a double shadow. The Angle of the pigtail headband prevents the reflected light from returning along the original path. General digital signals generally do not have this problem.
An optical fiber interface is a physical interface used to connect optical cables. There are usually SC, ST, FC, and other types, which are developed by the Japanese NTT company. FC is the abbreviation of Ferrule Connector, which is externally reinforced by a metal sleeve and tightened by a turnbuckle. The ST interface is usually used for 10Base-F, and the SC interface is usually used for 100Base-FX.
The optical fiber can conduct light waves from the inside, which is divided into single-mode (conducting long-wavelength laser) and multi-mode (conducting short-wavelength laser). The connection distance of single-mode cable can be up to 10 kilometers, and the connection distance of multi-mode cable is much shorter, is 300 meters or 500 meters (mainly depending on the difference in laser, there are generally two kinds of short-wavelength laser light source, one is 62.5, one is 50), in addition, there are also two kinds of cable connector part. The SC interface is 1GB interface and the LC interface is 2GB interface.
The decay of "UPC" is smaller than that of "PC", which is generally used for equipment with special needs, and some foreign manufacturers use FC/UPC for the internal jumper of ODF frame, mainly to improve the index of ODF equipment itself.
In addition, the "APC" model is used more in radio and television and early CATV, and its pigtail head uses an inclined end face, which can improve the quality of the TV signal, mainly because the TV signal is analog light modulation when the coupling surface of the joint is vertical, the reflected light returns along the original path. Since the uneven refractive index distribution of the fiber will return to the coupling surface again, although the energy is very small, because the analog signal can not completely eliminate the noise, it is equivalent to superimposing a weak signal with a delay on the original clear signal, which is reflected in the screen. The Angle of the pigtail headband prevents the reflected light from returning along the original path. General digital signals generally do not have this problem.
Contact information:
If you have any ideas, feel free to talk to us. No matter where our customers are and what our requirements are, we will follow our goal to provide our customers with high quality, low prices, and the best service.
Email:info@loshield.com
Tel:0086-18092277517
Fax: 86-29-81323155
Wechat:0086-18092277517








