980nm 50mw Infrared Induction Mini Laser Head uses imported high-quality laser diodes as the core components, low power consumption, and high-efficiency optical power output; The tail is connected with red, black, and yellow silicone lead wire 50mm, The red line is connected to a power supply cathode, the black line is connected to a power supply anode, yellow with the TTL modulation signal, the wires thickness, and length can be customized according to requirements; PWM modulation board an intelligent feedback control circuit; Optical Lens high transmittance optical system, stable performance, good consistency, and long service life.

980nm-50mw-Infrared-Induction-Mini-Laser-Head

Specifications:

PRODUCT PARAMETERS
TC=25℃
Items	Parameter	Items	Parameter
Housing size	Φ6*23mm	Optical Lens	4.7/glass
Circuit Board Size	8.2*9.5mm	Fan	/
Circuit Board	3-5V/PWM modulation board	Product Material	Copper/H59
Wire Rod	28# red, black and yellow silicone lead wire 50mm	Product Net Weight	/
OPTICAL PARAMETERS
TC=25℃
Items	Symbol	Min	Type	Max	Unit	Condition
Optical Output Power	Po	1.4	1.5	1. 6	mW	3. 3V power supply
Working current	Iop	/	12	15	mA
Operating Voltage	Vop	3	3.5	5	V
Laser Wavelength	λp	965	980	995	nm
Electric Power	W1	0.03	0. 04	0.07	W
Control signal voltage	2.5-5.5V	The control mode	PWM modulation
Response frequency	< 100KHz	Initial response duty	3%
Laser Beam Mode	Dotted	Working Mode	Pulse work
Light spot Size	30mm< 1mm (adjustable)	Working Temperature	-10℃-40℃
Concentric	/	Storage Temperature	-40℃-80℃
Working Time	10000H	Enclosure Polarity	positive electrode

Product Features:

1. This 980nm laser light hits a spot that is invisible to the naked eye and needs to be observed with special equipment (such as a CCD camera)

2. Wire plug wire can choose any one

3. Customized products: We can customize and design the wavelength, external dimensions, optical shape requirements, electrical parameters, etc. according to customer needs.

4. All products are tested before leaving the factory

5. Optical products are dust-proof, and laser products are packed with anti-static or vacuum.

980nm infrared point laser module

Use Precautions:

1. The laser light emitted by the laser diode may cause damage to human eyes. When the diode is working, it is strictly forbidden to look directly at its end face.

2. The device needs a suitable driving power supply, the instantaneous reverse current cannot exceed 20uA, and the reverse voltage cannot exceed 3V, otherwise, the device will be damaged. When the laser diode is connected to the power supply, the output voltage of the power supply should be zero; when the current is adjusted, it should be increased or decreased slowly, so as not to damage the device due to inrush current.

3. The device should be stored in a dry environment.

4. Working at a higher temperature will increase the threshold current, reduce the conversion efficiency, and accelerate the aging of the device.

5. When the output power is higher than the specified parameters, the aging of the device will be accelerated.

6. The device needs to dissipate heat or be used under refrigeration conditions, and the temperature is strictly controlled below 40 degrees to ensure lifespan Bracelet method.

8. The output wavelength of the laser is affected by the working current and heat dissipation. It is necessary to maintain good heat dissipation conditions and reduce the temperature of the die during the operation.

Contact:

If you have any ideas, welcome to talk with us.

Email: info@loshield.com