808nm 500mw Near IR Night Vision Laser Head uses high-quality laser diodes as the core equipment and the focal length can be adjusted. By rotating the laser head left and right, the focal length can be adjusted according to the working distance to suitable spot size. 808nm 500mw Near IR Night Vision Laser Head interior of the product is assembled with pure copper, which can quickly cool down the laser diode. 808nm 500mw Near IR Night Vision Laser Head with cooling DC fan, and industrial heat exhaust fan. Low power consumption, fast heat dissipation, low noise, energy saving, and environmental protection.

808nm-500mw-Near-IR-Night-Vision-Laser-Head

Specifications:

Laser Wavelength: 808nm

Laser Color: Near Infrared

Output band: invisible light

Output power: 500mW

Supply voltage: 12V

Input current: 650mA

Spot Mode: Dot

Focal length: adjustable

Wire length: 25cm

Housing size: 33*33*55mm

Circuit Board Size: 53.2*36.1*22.5mm

Working temperature: -10℃~40℃

Storage temperature: -40℃~85℃

Working life: 8000 hours

Product Material: Aluminum 6061

Product Net Weight: 183g

808nm IR laser module

Customized Content:

1. Laser diode

Key Characteristics of Laser Diodes: Wavelength, Output Power, and Operating Temperature

We can provide laser diode modules with wavelengths ranging from 405nm to 1550nm, and the driving power of the laser module can be equal to or less than its laser diode operating power.

2. Lens

Here are the basic optical specifications we need to agree on before starting any laser module production The main characteristics of beam collimation: are divergence angle, laser spot size

Any type of laser pattern can also be provided by using DOEs (Diffractive Optical Elements).

3. Power

The laser modules have the following standard output powers:

Class l 0.5mW (0.25-0.45mw)

Class II 1mW (0.7-0.9mw)

Class A 5mW (2.5-3.5mW)

Class B 50mW (38-45mW)

Customized according to your requirements (1mw~5W)

4. Control circuit

Laser drive circuits: working voltage range, CW or pulse modulation mode (TTL/PWM signal control: frequency range), drive current requirements, APC or ACC mode, laser module safety, or circuit protection requirements.

The laser module controlled by the APC driver will automatically adjust the input current to output a constant value of optical power.

A laser module controlled by an ACC driver would have a constant input current value, while the output power could vary.

TIPS:

1. Products that cooperate with lasers must have active or passive protective measures.

2. This product must be used in accordance with the national laser safety product requirements. If it is not used in accordance with the full specifications, it may cause personal injury or fire.

Contact:

If you want more details, welcome to talk with us.

Email: info@loshield.com