405nm 200mw UV Adjustable Dot Laser Head can manually adjust the spot size and can adjust to the appropriate focal length according to your demand, with TTL modulation, and can work for a long time, the real industrial-grade laser. Light spot mode: point (110 degrees) (one-line or cross line can be customized, please contact us), We can provide customers with optoelectronic solutions and design laser modules that meet customer needs.

Specifications:

Item	Parameters
Dimensions	333355mm
Laser wavelength	405nm
Output Power	200-300mw
Operating Voltage	12V
Working current	500A
Storage temperature	-40°C-85°C
Operating temperature	-10°C-80°C
wire length	25CM
Irradiation distance	8 M
spot size	≤15mm
operating hours	10000 H

405nm-200mw-UV-Adjustable-Dot-Laser-Head

The blue and white wires are connected to the positive and negative poles. When the voltage reaches a certain value, TTL can work and can control the switch of the laser. There is no need to manually control the laser operation through a physical switch. automatic control.

405nm 200mw UV Adjustable Dot Laser Head use imported laser diodes as the core components and apply the latest communication laser production equipment and technology to the production of industrial lasers. The high-performance industrial lasers produced have incomparable advantages with other similar products.

Product Advantages:

1. 405nm 200mw UV Adjustable Dot Laser Head is small in size: 33*33*55, and size can be customized.

2. Adopt new originally imported laser diode, long service life, high brightness, and clear spot.

3. Adjust the TTL to the adjustable focal length, adjust the focal length according to the distance of the working distance, and adjust to the appropriate spot size.

4. Good heat sink effect, 12v output voltage, industrial heat exhaust fan, low power consumption, heat dissipation block, low noise, energy saving, and environmental protection.

point laser head laser module

Application:

The 405nm 200mw UV Adjustable Dot Laser Head is suitable for engraving, the light spot is small, and the engraving imprint is smaller. It can be carved on wood chips, bamboo chips, plastics, and foams, but the cutting speed is slow or not possible.

Tips:

Buyers, please look carefully at the wavelength before purchasing. At the same power, the green light at 532nm has the highest visibility, followed by orange-red light, which is 635nm. The 405nm visibility of purple light is relatively weak, and 700nm The above are near-infrared, invisible light, the human eye is not sensitive, and only a little faint red dot can be seen.

1. Compared with other lasers of the same power (compare red light and green light), the purple light is much darker, please do not compare it with (red light and green light)

2. When using this product, please wear laser safety goggles to protect your eyes and prevent short-term dazzling caused by direct laser light.

3. All products will be checked to ensure that they are correct before delivery.

Contact:

If you have any ideas, welcome to talk with us.

Email: info@loshield.com