What Is Anti-laser Film?

Let's introduce the Laser Safety Film:

Ⅰ.Product introduction:  laser safety film, a variety of special metal oxide materials by nano-grinding dispersion, multilayer optical precision coating composite preparation. While maintaining high light transmittance and high definition, it can absorb and reflect the specific band, so as to achieve more than a 99.99% laser-blocking effect.

Ⅱ. Product structure: surface UV anti-scraping layer + optical PET base film + nano functional composite layer + optical PET base film + optical adhesive + release film

Ⅲ. Product advantages:

1. The surface anti-scraping layer can effectively cope with daily maintenance, easier to clean than the traditional coating;

2. Nano functional composite layer is located in the middle of multi-layer optical PET film, inorganic material does not decay, avoiding the disadvantages of the traditional coating after scratching protection decline;

3. Wide range of protection bands, according to customer requirements at the same time to UV, visible light, and infrared selective protection, achieve a film multi-purpose;

4. The protection of incident light at all angles can be realized, avoiding the limitation that traditional coating can only be normal incidence protection;

5. Safe and explosion-proof, strong impact resistance, 3P-T60100 laser protective film adopts high viscosity optical adhesive, in the case of accidental crushing of the substrate still by high strength PET to keep the substrate in an overall state, greatly reducing the risk of slag splash injury. It is safer than the common acrylic coating plate in the market.

6. Film material selection is optical grade, and neutral color, the field of view does not change color. Will not produce color bias and error of judgment.

7. Easy to use, can be attached to any substrate surface, according to the actual size of random cutting, DIY construction, no customization;

8. Cost-effective, the use of industrial optical coating mass production, high yield;

9. Long storage time, film roll independent packaging, dry environment can be stored for more than five years;

Ⅳ. Product application: Due to the special product, laser protective film application includes laser equipment operator protection, but is not limited to this, such as security, military, criminal investigation, etc. According to the actual application, can use anti-laser film, anti-laser masterbatch, anti-laser coating, anti-laser additives, and other different processes.

I. About the spectrum (ultraviolet/infrared/visible light) : UVC: short wave ultraviolet, easy to be absorbed by the ozone layer, can not reach the surface of the earth.

Second, spectrum selection solution: Our company focuses on the development and production of all-band spectrum selection field for more than ten years, according to customer requirements for UV, visible light, infrared selective intervention, the specified band to achieve 99.99% high barrier rate, and combined with practical applications to provide the following form solutions: functional glue additives, functional coatings, functional film, functional film, functional plastic masterbatch, etc.

Additive: powder directly into the glue; Liquid additive

Coating: glass, plate coating; Film online coating solution

Film (internal addition type): PET, PVC, PE, etc. Laminated glass interfilm

Film: plate film; Electronic products film; Automotive Construction film

Plastic masterbatch: film masterbatch; Brushed fiber masterbatch; Plate and other plastic products for anti-UV/anti-aging/anti-fading, anti-infrared/heat insulation/heat preservation, UV400/ anti-blue light spectrum intervention program at the same time, according to customer needs to increase the following functions: inorganic constant color, antibacterial, flame retardant, antistatic, hydrophobic anti-fog, hydrophobic self-cleaning, hardening and so on.

Ⅴ. Application method

Step 1: Prepare water bottle, non-woven fabric, plastic scraper, rubber scraper, and art blade;

Step 2: Wash the window glass with detergent;

Step 3: According to the window size, cut out the corresponding size of the window film;

The fourth step: deployment of installation liquid: add the appropriate amount of neutral detergent in the water (shower gel is better), into the watering can, and evenly spray on the surface of the glass;

Step 5: Tear off the release film, and paste the film on the wet glass surface;

Step 6: Release film as a protective film covering the surface of the window film, with a scraper to squeeze out the water and bubbles;

Step 7: Wipe the surface clean with a dry cloth, remove the release film, and install it.

Contact information:

If you have any ideas, feel free to talk to us. No matter where our customers are and what our requirements are, we will follow our goal to provide our customers with high quality, low prices, and the best service.