Product Overview
The JTBY-230SV-350 is a 230mm simple-version tube laser cutting chuck designed for laser tube cutting machines handling large-diameter pipes and structural steel profiles. Its square and round hole design supports different workpiece shapes, including round pipes, square tubes, I-beams, channel steel and angle steel within the specified clamping range.
With a round pipe capacity of Ø15–Ø230 mm and square tube compatibility up to 230 × 230 mm, this model provides a practical clamping solution for manufacturers working with various metal tube sizes. The front and rear chuck configuration has a maximum combined load capacity of 300 kg, making it suitable for compatible tube laser cutting machine configurations with demanding workpiece requirements.
The JTBY-230SV-350 also supports selected structural profiles, including I-beams and channel steel up to No. 15, as well as angle steel up to No. 12. For special-shaped workpieces that exceed the effective jaw length, customized jaws can be considered after evaluating the actual profile dimensions.
For machine manufacturers and equipment integrators, the defined front and rear dimensions and flange specifications provide important reference points for machine integration and replacement projects.
Key Features of JTBY-230SV-350
230mm Clamping Capacity for Large-Diameter Tubes
Designed for larger tube processing requirements, the JTBY-230SV-350 accommodates round pipes from Ø15 mm to Ø230 mm and square tubes up to 230 × 230 mm. It is suitable for tube laser cutting applications involving different pipe dimensions within its specified clamping range.
Compatible with Round, Square and Structural Steel Profiles
Beyond conventional round and square pipes, this tube laser cutting chuck supports selected structural profiles, including I-beams, channel steel and angle steel. This provides additional flexibility for manufacturers processing different metal sections on compatible tube laser cutting machines.
Standard and Customized Jaw Options
The standard jaws are designed for workpieces within the specified clamping range. For special-shaped profiles that exceed the effective jaw length, customized jaws can be evaluated according to the workpiece geometry and clamping requirements.
Defined Mounting and Flange Specifications
The JTBY-230SV-350 features a 350 mm front dimension and a 145 mm rear dimension. Its front and rear flange specifications are provided for equipment integration and replacement assessment. Buyers should confirm the mounting interface and transmission configuration before ordering.
Technical Specifications
| products |
 |
| Model | JTBY-230SV-350 |
| Chuck Version | 230 Simple Version |
| Chuck Type | Square / Round Hole |
| Round Pipe Range | Ø15–Ø230 mm |
| Square Tube Capacity | Up to 230 × 230 mm |
| I-Beam / Channel Steel | Up to No. 15 |
| Angle Steel | Up to No. 12 |
| Circumscribed Circle Limit | ≤230 × 230 mm |
| Front Dimension | 350 mm |
| Rear Dimension | 145 mm |
| Maximum Combined Load | 300Kg(two Chucks) |
| Front Flange | 110 |
| Front Transmission Ratio | 1:4 |
| Rear Flange | 90/110 |
| Rear Transmission Ratio | 1:3 |
| Jaw Configuration | Standard Jaws / Customized Jaws |
Workpiece Compatibility and Applications
The JTBY-230SV-350 is developed for tube laser cutting machines used in metal fabrication and structural profile processing. Its 230mm working range makes it suitable for applications involving larger metal tubes and selected structural sections.
Round Pipe Cutting
Suitable for round metal pipes with diameters from Ø15 mm to Ø230 mm. Typical applications include industrial piping, metal frames and tubular components.
Square and Rectangular Tube Processing
Designed for square tubes up to 230 × 230 mm, subject to the specified circumscribed-circle limit and jaw geometry. Actual rectangular tube compatibility should be checked before ordering.
I-Beam and Channel Steel Processing
Supports compatible I-beams and channel steel up to No. 15. The actual section dimensions and clamping position should be evaluated to ensure secure contact with the jaws.
Angle Steel Processing
Suitable for compatible angle steel up to No. 12, depending on profile dimensions and jaw configuration.
Machine Compatibility and Installation
When selecting a tube laser cutting chuck for a new machine or replacement project, mounting dimensions and flange specifications are important factors to check. The JTBY-230SV-350 is designed with defined front and rear dimensions to support machine integration and installation assessment.
The chuck features a 350 mm front dimension and a 145 mm rear dimension. These measurements provide key dimensional references for evaluating installation space, mounting arrangements and compatibility with the machine structure.
Mounting and Flange Specifications
The JTBY-230SV-350 comes with the following flange and transmission specifications:
Front Flange: 110, transmission ratio 1:4
Rear Flange: 90 (110), transmission ratio 1:3
These specifications should be checked against the machine's mounting interface and transmission configuration before installation. For replacement projects, buyers are advised to compare the existing chuck drawings and flange dimensions to avoid mismatches.
Installation and Machine Integration
For tube laser cutting machine manufacturers and equipment integrators, proper installation requires consideration of more than the chuck's external dimensions. The mounting position, connection interface, transmission arrangement and available installation space should all be evaluated.
Before ordering the JTBY-230SV-350, we recommend providing the following information:
Tube laser cutting machine model and configuration
Existing chuck mounting dimensions or technical drawings
Front and rear flange interface requirements
Workpiece size and maximum loading requirements
Our team can review these details to help evaluate installation compatibility and discuss suitable mounting or customization solutions for OEM equipment integration and chuck replacement projects.
OEM and Custom Jaw Solutions
Different tube laser cutting machines and workpiece profiles may require different chuck configurations. We provide customization support for OEM projects, replacement requirements and special-shaped tube applications.
Customized Chuck Jaws
The JTBY-230SV-350 supports standard and customized jaw options. For I-beams, channel steel, angle steel and other special profiles, customized laser chuck jaws can be evaluated according to workpiece dimensions and clamping requirements.
Mounting Interface Customization
Different machines may have different mounting and flange requirements. We can review your technical drawings and existing chuck specifications to evaluate mounting compatibility and suitable interface solutions.
OEM Tube Laser Chuck Integration
For tube laser cutting machine manufacturers and equipment integrators, we support chuck selection and configuration assessment based on machine models, workpiece sizes and installation requirements.
FAQs
What is the maximum round pipe diameter supported by the JTBY-230SV-350?
The JTBY-230SV-350 supports round pipes from Ø15 mm to Ø230 mm, subject to the standard jaw configuration and actual clamping conditions.
What is the maximum load capacity of this chuck system?
The maximum combined load capacity of the front and rear chucks is 300 kg. Buyers should also consider the machine's overall load limitations and operating configuration.
Can the chuck clamp I-beams, channel steel and angle steel?
Yes. The specified compatibility includes I-beams and channel steel up to No. 15 and angle steel up to No. 12. Actual compatibility depends on profile dimensions and jaw contact conditions.
Are customized jaws available for special-shaped tubes?
Yes. Customized jaws can be evaluated for special profiles that exceed the effective range of the standard jaws. Please provide workpiece drawings or dimensional information for assessment.
Looking for a 230mm Tube Laser Cutting Chuck?
If you are sourcing a 230mm laser pipe cutting chuck for round tubes, square tubes or structural steel profiles, contact JTBYShield to discuss your machine configuration and technical requirements.
Send us your workpiece drawings and mounting specifications to request a technical evaluation and quotation.
Hot Tags: 230mm tube laser cutting chuck for round and square pipes – jtby-230sv-350, China, manufacturers, suppliers, factory, customized, wholesale, best, cheap, professional, for sale, near me
