Different Laser Engraving Power Engrave Different Materials?

The application range of Laser Engraving technology is becoming wider and wider, and there are more and more types of engraving machines on the market. The power of engraving lasers for business logos is also getting higher and higher. There are a variety of options, mainly laser power. We often receive inquiries from customers about the laser power of 5w, 10w, 15w, 20w, and 40w. But in fact, the power of the semiconductor laser diode is 5w, and the laser power cannot reach 5w except the power consumption. What we call 15w, 20w refers to the electric power of the laser, and the electric power is current * voltage. Because the engraving depth depends on the laser power, it is often heard that "the higher the power, the higher the energy, the deeper the engraving" and the more types of materials to engrave. The size of the power setting is proportional to the energy of the laser (when other parameters are set unchanged).

Different materials carved by different power:

1. 500mW carving: 3-5mm basswood, dark KT board, cardboard, kraft paper, non-woven fabric, plastic, solid wood, bamboo, gourd, plastic, etc.

2. 1W engraving: 3-5mm basswood, dark KT board, cardboard, kraft paper, non-woven fabric, plastic, solid wood, bamboo, gourd, plastic, etc.

3. 1.6W engraving: 3-5mm basswood, dark KT board, cardboard, kraft paper, non-woven fabric, plastic, solid wood, bamboo, gourd, plastic, acrylic, etc.

4. 4W engraving: 3-5mm basswood, dark KT board, cardboard, kraft paper, non-woven fabric, plastic, solid wood, bamboo, gourd, plastic, acrylic, aluminum alloy anode, metal surface spray paint, etc.

5. 5W engraving: 3-5mm basswood, dark KT board, cardboard, kraft paper, non-woven fabric, plastic, solid wood, bamboo, gourd, plastic, acrylic, aluminum alloy anode, stainless steel, metal surface spray paint, etc.

6. 8W engraving: 3-5mm basswood, dark KT board, cardboard, kraft paper, non-woven fabric, plastic, solid wood, bamboo, gourd, plastic, acrylic, aluminum alloy anode, stainless steel, seal engraving, metal surface spray painting, etc. , cutting fabric, about 3mm wood, fabric, cardboard, etc.

7. 10W engraving: 3-5mm basswood, dark KT board, cardboard, kraft paper, non-woven fabric, plastic, solid wood, bamboo, gourd, plastic, acrylic, aluminum alloy anode, seal engraving, stainless steel, metal surface spray painting, etc. , cutting 6-8mm wood board, cloth, cardboard, etc.

Laser engraving machines with different power wattages have different effects on the workpiece. The greater the power of the engraving laser, the deeper the engraving depth and the faster the speed. But the specific effect is still subject to the sample, because some materials can be engraved deeper when the power is used.

This high-power engraving lasers electric power is 40W, laser output power is 10W. It can engrave stainless steel and cut 6-8mm wood boards. The body is made of aluminum, which has good heat dissipation effect, high spot precision and good engraving effect. The 10w laser engraver can engrave bamboo and wood products, paper, leather, wool, stainless steel, rubber plate, silicone plate, PVC, PET, epoxy resin, and other materials. Laser engraving has the characteristics of fast speed, high efficiency and good effect.

Contact information:

If you have any ideas, feel free to talk to us. No matter where our customers are and what our requirements are, we will follow our goal to provide our customers with high quality, low prices, and the best service.